Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the tail section/fairing of the Moto Guzzi Le Mans 1000

Model: Moto Guzzi Le Mans 1000
Part:

Video tutorial

In today's video, you will see the main steps to remove the fairing or tail section of the Moto Guzzi Le Mans 1000. First, remove the seat of your motorcycle; then take off any luggage rack found at the rear, as shown in the video. Next, unscrew the screws of the rear light and then those of the tail section using a Torx screwdriver; now unscrew the additional screws near the fuel tank to remove the side plastics and the entire rear fairing; for reassembly, simply follow the reverse procedure!


Updated on 30 May 2026 by ScegliAuto


Related tutorials

How to Adjust the Valves on the Moto Guzzi Le Mans 1000?
How to Adjust the Valves on the Moto Guzzi Le Mans 1000?
Le Mans 1000 To adjust the valves on the Moto Guzzi Le Mans 1000, you need to loosen the screws that secure the cover on top of the engine block, allowing access …
How to remove the fuel tank from a Moto Guzzi Le Mans 1000?
Le Mans 1000 To remove the fuel tank from the Moto Guzzi Le Mans 1000, disconnect the two cables connected to the sides of the tank by loosening the bolts that se…
How to Dismantle the Engine of a Moto Guzzi Le Mans 1000?
How to Dismantle the Engine of a Moto Guzzi Le Mans 1000?
Le Mans 1000 To dismantle the engine of a Moto Guzzi Le Mans 1000, loosen the screws that secure the two cylinders at the top of the engine so that they can be re…

How to Set the Clock on the Sym Jet14 125?

To adjust the clock on the Sym Jet14 125, turn on the instrument panel by inserting the ignition key into the corresponding slot. Once the panel is on, press and hold the M button located underneath until one of the numbers on the clock starts flashing. At this point, repeatedly press the S button, also located beneath the panel, to change that number. After making the change, press the M button to move on to the next numbers, finishing by turning off the panel.

Watch the video!


by ScegliAuto

More videos