Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
To change the engine oil on a Moto Guzzi California 1400, loosen the oil drain plug located at the central lower part of the bike. Once the plug is loosened, you can collect all the used oil in a suitably positioned container. Next to the drain plug, you will also find the oil filter, which should be removed and replaced with a new spare part. Finally, close the drain plug and top up the oil through the breather located on the left side of the bike.

Updated on 11 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Transmission Oil of the Moto Guzzi California 1400
How to Replace the Transmission Oil of the Moto Guzzi California 1400
California 1400 Today, we will see the instructions that allow us to perform the routine maintenance service on the transmission by replacing the transmission oil of…
How do you replace the battery of the Moto Guzzi California 1400?
How do you replace the battery of the Moto Guzzi California 1400?
California 1400 To replace the battery of the Moto Guzzi California 1400, first you will need to remove the seat of the motorcycle from its housing: this way you wil…
How to Perform a Diagnosis on a Moto Guzzi California 1400?
How to Perform a Diagnosis on a Moto Guzzi California 1400?
California 1400 To perform a diagnosis on a Moto Guzzi California 1400, you need to access the components installed under the seat: this must be removed from its hou…

How to replace the air filter in the Herald Classic 125?

In this tutorial, you will see how to replace the air filter in the Herald Classic 125, a very simple and quick operation. First, position yourself on the left side of the motorcycle, then grab the panel located under the seat, pull it towards you, and detach it from the frame. Next, unscrew the three fastening screws of the airbox cover, remove it, and take out the old filter from its housing. At this point, remove any dirt residue present, insert the replacement filter, and reassemble everything by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos