|
Do it yourself
| |||
| ||||
|
Model: Moto Guzzi California 1400
This guide outlines the steps to remove and replace the rear wheel, brake disc, and tyre on a Moto Guzzi California 1400. First, place the motorcycle on a stand and start unscrewing the bolts from the exhaust silencer brackets to remove them. Then, use a socket wrench with an extension to unscrew the central nut of the wheel, pulling out the axle from the other side, as illustrated in the video. Now, remove the wheel, replacing the tyre or brake disc if necessary, following the video tutorial to the end!
Updated on 12 July 2026 by ScegliAuto
Video tutorial
Related tutorials
California 1400
To adjust the valves on the Moto Guzzi California 1400, first bring the piston to the top dead centre position. To do this, remove the cap from which…
California 1400
To replace the battery of the Moto Guzzi California 1400, first you will need to remove the seat of the motorcycle from its housing: this way you wil…
California 1400
Today, we will see the instructions that allow us to perform the routine maintenance service on the transmission by replacing the transmission oil of…
|
How to Replace the Coolant in the Piaggio Medley 125?
To replace the coolant in the Piaggio Medley 125, loosen the screws securing the side grille of the scooter to remove it and access the radiator underneath. At the base of the radiator, locate the drain plug, which must be unscrewed to allow the coolant to flow into a suitably positioned container. Next, open the under-seat compartment and locate the coolant refill cap: by opening this cap, you can insert the new coolant. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.009
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
