Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the battery of the Moto Guzzi California 1400?

Model: Moto Guzzi California 1400
Part: Battery

Video tutorial

To replace the battery of the Moto Guzzi California 1400, first you will need to remove the seat of the motorcycle from its housing: this way you will have access to the components below. Here you will find the battery cover panel that must be removed from its location in order to locate the underlying device: the cables connected to the battery and the screws securing its supports must be removed.

This way you will be able to verify that everything works correctly after inserting the new replacement part.


Posted on 11 May 2025 by ScegliAuto


Related tutorials

How to Adjust the Valves on the Moto Guzzi California 1400?
How to Adjust the Valves on the Moto Guzzi California 1400?
California 1400 To adjust the valves on the Moto Guzzi California 1400, first bring the piston to the top dead centre position. To do this, remove the cap from which…
Removing the Rear Wheel on a Moto Guzzi California 1400
Removing the Rear Wheel on a Moto Guzzi California 1400
California 1400 This guide outlines the steps to remove and replace the rear wheel, brake disc, and tyre on a Moto Guzzi California 1400. First, place the motorcycle…
How to Perform a Diagnosis on a Moto Guzzi California 1400?
How to Perform a Diagnosis on a Moto Guzzi California 1400?
California 1400 To perform a diagnosis on a Moto Guzzi California 1400, you need to access the components installed under the seat: this must be removed from its hou…

How to Change the Engine Oil of a Triumph Speed 400?

To change the engine oil of a Triumph Speed 400, start by positioning the bike on a flat surface and ensure the engine is warm but not too hot. Locate the oil filler cap on the engine and unscrew it. Place a collection container under the oil drain plug on the oil sump and unscrew the plug to allow the used oil to drain out. Once the draining is complete, refit the drain plug. Remove and replace the oil filter using an oil filter wrench. Apply a little new oil to the seal of the new filter before installation. Fill the engine with new oil through the filler cap opening until it reaches the recommended level, and you will have completed the change.

Watch the video!


by ScegliAuto

More videos