Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Adjust the Clutch Lever on the Moto Guzzi V7 III?

Model: Moto Guzzi V7 Iii
Part: Clutch

Video tutorial

To adjust the clutch lever on the Moto Guzzi V7 III, tighten the nut located at the left handlebar lever: tightening this nut will reduce the lever travel and make it feel firmer; conversely, loosening it will have the opposite effect. You can also adjust the clutch by tightening the nut at the other end of the cable, near the master cylinder.

This nut can be tightened or loosened depending on your needs, adjusting the clutch based on the rider's preference.


Updated on 1 August 2026 by ScegliAuto


Related tutorials

Replacing the Brake and Clutch Levers on a Moto Guzzi V7 III
Replacing the Brake and Clutch Levers on a Moto Guzzi V7 III
V7 Iii This video shows how to remove and replace the brake and clutch levers on a Moto Guzzi V7 III. First, remove the front brake lever by unscrewing the …
Fitting the 2nd Customisation Kit
V7 Iii As is advisable whenever performing maintenance on a motorcycle, secure your Moto Guzzi V7 III on a stable and safe stand. This way, you ensure the o…
How to disassemble and repair the speedometer of the Moto Guzzi V7 III
How to disassemble and repair the speedometer of the Moto Guzzi V7 III
V7 Iii Below we will see the step-by-step instructions that will allow us to disassemble and repair the speedometer of the Moto Guzzi V7 III. First, we put …

How to Replace the Silencer on a Ducati Monster 696

This guide will show you how to remove and replace the silencer on a Ducati Monster 696 motorcycle, following the instructions below. First, place your motorcycle on a stand and start by unscrewing the fixing screw for the exhaust bracket. Then, disconnect the spring to remove the silencer from the exhaust manifold, as shown in the video. At this point, modify the manifold to install the new exhaust terminals; replace the entire exhaust if necessary by unscrewing the manifold nuts and applying the reverse procedure for reassembly!

Watch the video!


by ScegliAuto

More videos