Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
Descriptive guide for replacing the air filter on an MV Agusta F3. Obtain the air filter p.n. 8000b5993 and a set of traditional Allen keys. Position the motorcycle on a stand. Lift the passenger seat and unscrew the Allen screw of the rider's seat and remove it from the guide. Detach the two tank cover panels and unscrew all the Allen screws located on the upper and lower parts of the tail section. Pull the tail section outwards. Unscrew the side support screws of the tank and the two screws under the seat. Once the screws are removed, lift the tank and disconnect the fuel level connector and the quick-release fuel hose (press the two side tabs). Unscrew the sensor located on the left side of the air box. Disconnect the grey connectors of the three injectors. Unscrew all the screws with a star screwdriver and lift the cover of the air box. Replace the air filter with the new one. Reassemble everything as per disassembly.

Updated on 9 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the air filter of the MV Agusta F3 800?
How do you replace the air filter of the MV Agusta F3 800?
F3 800 It will be possible to replace the air filter of the MV Agusta F3 800 by loosening the screws that fix the front shield of the motorcycle to its seat…
How to Change the Engine Oil and Oil Filter on an MV Agusta F3 800
How to Change the Engine Oil and Oil Filter on an MV Agusta F3 800
F3 800 In this guide, discover how to change the engine oil and oil filter on an MV Agusta F3 800 by following these simple and quick steps. First, place th…
How to Replace the Water Pump on a MV Agusta F3 800
How to Replace the Water Pump on a MV Agusta F3 800
F3 800 This guide provides the main instructions on how to remove and replace the water pump on the MV Agusta F3 800 motorcycle. To access the water pump, y…

How to Remove the Engine from the Piaggio Vespa GTS 250 - 300

In this guide, you will learn how to remove the engine block from the body of the Piaggio Vespa GTS 250 and GTS 300. First, place your scooter on the centre stand and begin by removing the exhaust silencer by unscrewing the bolts; then, unscrew the central bolt of the wheel hub and remove the entire wheel, as shown in the video. At this point, disconnect the suspension from the engine block by detaching the fuel lines and various wiring; then, remove the engine block, applying the reverse procedure for reassembly!

Watch the video!


by ScegliAuto

More videos