Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Oil Sump from an MV Agusta Brutale 1078RR

Model: Mvagusta Brutale 1078
Part: Oil pan

Video tutorial

In this video tutorial, you will see how to remove the oil sump from an MV Agusta Brutale 1078RR by following these simple steps. First, position your bike on the stand and drain the engine oil by unscrewing the central bolt with a socket spanner; then unscrew all the bolts securing the oil sump using a ratchet spanner.

Once the fifteen bolts are unscrewed, remove the oil sump, disconnecting the electrical connector of the sensor as shown in the video. Clean and reassemble everything, applying the reverse procedure!


Updated on 5 April 2026 by ScegliAuto


Related tutorials

How to Remove the Fuel Pump on an MV Agusta Brutale 1078RR
How to Remove the Fuel Pump on an MV Agusta Brutale 1078RR
Brutale 1078 In today's video, we will see the instructions that will allow us to remove and replace the fuel pump located on the tank of an MV Agusta Brutale 107…
How to Replace the Sprocket on the MV Agusta Brutale 1078RR?
How to Replace the Sprocket on the MV Agusta Brutale 1078RR?
Brutale 1078 To access the sprocket on the MV Agusta Brutale 1078RR and replace it, you need to remove the hydraulic clutch release bearing by unscrewing its thre…
How to Change the Engine Oil on a MV Agusta Brutale 1078 R
How to Change the Engine Oil on a MV Agusta Brutale 1078 R
Brutale 1078 In today's tutorial video, you will see how to change the oil and oil filter, performing routine maintenance on the MV Agusta Brutale 1078 R. First, …

How to Replace the Headlight Bulb on the Suzuki Address 110

To replace the headlight bulb on the Suzuki Address 110, you must completely remove the wing mirrors so that you can rotate them counterclockwise: once removed, proceed to loosen the screws securing the front fairing, located at the sides of the instrument cluster. Once the front fairing is removed, disconnect the internal connector of the headlight, allowing the bulb inside to be extracted and replaced with a new one; after replacement, reassemble all the removed parts.

Watch the video!


by ScegliAuto

More videos