Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Sprocket on the MV Agusta Brutale 1078RR?

Model: Mvagusta Brutale 1078
Part: Checks and maintenance

Video tutorial

To access the sprocket on the MV Agusta Brutale 1078RR and replace it, you need to remove the hydraulic clutch release bearing by unscrewing its three screws. Once the release bearing is removed, you will have access to the clutch cover.

This must be removed after taking out its fixing screws, being careful not to dislodge the rod. When the sprocket is visible, unscrew the hex nut in its centre and then unscrew the 32 mm nut using a pin as shown in the video. At this point, the sprocket and washer can be removed, making way for the new parts, which should be installed in reverse order.


Updated on 18 April 2026 by ScegliAuto


Related tutorials

How to Remove the Fuel Pump on an MV Agusta Brutale 1078RR
How to Remove the Fuel Pump on an MV Agusta Brutale 1078RR
Brutale 1078 In today's video, we will see the instructions that will allow us to remove and replace the fuel pump located on the tank of an MV Agusta Brutale 107…
How to Remove the Oil Sump from an MV Agusta Brutale 1078RR
How to Remove the Oil Sump from an MV Agusta Brutale 1078RR
Brutale 1078 In this video tutorial, you will see how to remove the oil sump from an MV Agusta Brutale 1078RR by following these simple steps. First, position you…
How to Replace the Instrument Lighting of the Mv Agusta Brutale 1078 RR
How to Replace the Instrument Lighting of the Mv Agusta Brutale 1078 RR
Brutale 1078 In today's tutorial video, you will learn how to dismantle and replace the bulbs for the instrument panel lighting of the Mv Agusta Brutale 1079 RR. …

How to Replace the Headlight Bulb on the Suzuki Address 110

To replace the headlight bulb on the Suzuki Address 110, you must completely remove the wing mirrors so that you can rotate them counterclockwise: once removed, proceed to loosen the screws securing the front fairing, located at the sides of the instrument cluster. Once the front fairing is removed, disconnect the internal connector of the headlight, allowing the bulb inside to be extracted and replaced with a new one; after replacement, reassemble all the removed parts.

Watch the video!


by ScegliAuto

More videos