Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Fuel Pump on an MV Agusta Brutale 1078RR

Model: Mvagusta Brutale 1078
Part: Fuel pump

Video tutorial

In today's video, we will see the instructions that will allow us to remove and replace the fuel pump located on the tank of an MV Agusta Brutale 1078RR. First, it is necessary to remove the fuel tank by unscrewing all the fixing screws and disconnecting the electrical connector located underneath; once removed, we can take out the fixing screws of the fuel pump using a socket spanner.

At this point, extract the fuel pump and replace it, if necessary, with a new one; apply the reverse procedure for reassembly!


Updated on 3 May 2026 by ScegliAuto


Related tutorials

How to Remove the Oil Sump from an MV Agusta Brutale 1078RR
How to Remove the Oil Sump from an MV Agusta Brutale 1078RR
Brutale 1078 In this video tutorial, you will see how to remove the oil sump from an MV Agusta Brutale 1078RR by following these simple steps. First, position you…
How to Replace the Sprocket on the MV Agusta Brutale 1078RR?
How to Replace the Sprocket on the MV Agusta Brutale 1078RR?
Brutale 1078 To access the sprocket on the MV Agusta Brutale 1078RR and replace it, you need to remove the hydraulic clutch release bearing by unscrewing its thre…
How to Bleed and Replace the Brake Fluid on Mv Agusta Brutale 1078 RR
How to Bleed and Replace the Brake Fluid on Mv Agusta Brutale 1078 RR
Brutale 1078 In this video, you will find instructions to bleed and replace the rear brake fluid on an Mv Agusta Brutale 1078 RR motorcycle. First, remove the rid…

How to Replace the Headlight Bulb on the Suzuki Address 110

To replace the headlight bulb on the Suzuki Address 110, you must completely remove the wing mirrors so that you can rotate them counterclockwise: once removed, proceed to loosen the screws securing the front fairing, located at the sides of the instrument cluster. Once the front fairing is removed, disconnect the internal connector of the headlight, allowing the bulb inside to be extracted and replaced with a new one; after replacement, reassemble all the removed parts.

Watch the video!


by ScegliAuto

More videos