Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Mvagusta F3
Part:

Try to extract the mirror and its bracket by leveraging the surrounding space with a plastic wedge. If that doesn't work, try the following method shown in the tutorial. Push back the outer part of the mirror so that the inner part pops out, creating space behind it. Insert a wire through this space from top to bottom across the width of the mirror. Move the wire back and forth as shown in the video, without breaking it, until the mirror comes out of its housing. Unscrew the now exposed cross-head screw and also remove the mirror bracket.

Updated on 8 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Coolant Replacement on MV Agusta F3
Coolant Replacement on MV Agusta F3
F3 In this video tutorial, you will learn how to replace the coolant on an MV Agusta F3. First, remove the side fairing by unscrewing the fastening scre…

Replacing Brake Fluid on Aprilia RS 125

As always, secure your Aprilia RS 125 in a stable and safe position to work on it, ensuring the operator's safety as much as possible. It is advisable to take this precaution every time you perform maintenance on any motorcycle. Now, connect a suitably sized hose to the bleed valve (located on the brake system component at the front wheel). The other end of the hose should drain into a container you have prepared in advance. At this point, pump the old fluid out of the brake circuit into the container by repeatedly squeezing the brake lever. Be careful not to allow air to remain in the circuit by closing the valve before expelling all the fluid. Finally, after closing the valve, simply introduce the new fluid into the circuit. And that's it!

Watch the video!


by ScegliAuto

More videos