Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Suzuki
    3. :
  3. Burgman 400
    4. : Suzuki Burgman handlebar rives removal.

Model: Suzuki Burgman 400
Part:
Suzuki Burgman handlebar rives removal.

Before starting the operation of removing the plastic cover of the handlebar in our Suzuki Burgman, we place our bike in a stable and safe position that allows us to work on it, safeguarding our safety as much as possible. . This precaution, it would be better to take it whenever you want to perform a maintenance operation on a motorcycle. Now, let's proceed with the operation which turns out to be very simple. Using a screwdriver, push inwards the two clips (one on each side) that join the two plastic coverings of the handlebar. Once this is done, all we have to do is disengage the two parts of the covering and remove the upper element and, finally, the upper element.


Posted on 20 January 2024 by ScegliAuto



How to reset the oil light on the Suzuki Burgman 400
Burgman 400 If you own a 2005 Suzuki Burgman 400 and want to learn how to manually reset the oil light, then all you have to do is pay attention to the following
How to replace the headlight bulb on a Suzuki Burgman 400
Burgman 400 Before starting, we will have to place our Suzuki Burgman 400 on the central stand, and then rotate the front wheel to the right. We then begin by go
Where is the battery located in the Suzuki Burgman 400 scooter?
Burgman 400 In this video, we can see where the battery is located in the Suzuki Burgman 400 scooter, which is useful in case we need to replace it or perform an

How to bleed the brake system of the Kymco GP125

The guide shows how to bleed the Kymco GP125 brake oil system. After securing the vehicle and protecting the upper fairing with rags, unscrew the two fixing screws of the brake fluid reservoir cap and remove the covers. Using an 8mm wrench, loosen the bleed valve on the front caliper and install the drain hose. Activate the brake to let the fluid flow out of the system. Remove the brake caliper, push the piston all the way and clean it with a special spray. Reassemble everything in place and, if necessary, top up the fluid. Check the correct functioning of the brakes before taking the road.

Watch the video!


by ScegliAuto

More videos