Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Stator on MV Agusta F4

Model: Mvagusta F4 1000r
Part: Alternator

Video tutorial

On the MV Agusta F4, the stator is located beneath the fuel tank. To access it, first remove the seat and the left side fairing next to it. Once done, as shown in the video, you can unscrew the two bolts (both with a washer) of the stator using a socket wrench.

Pull the stator out of its housing by gripping it from above with a pair of pliers while supporting it from below with your other hand (hence the removal of the side fairing). For reassembly, simply reverse the steps until you reattach the seat.


Updated on 17 April 2026 by ScegliAuto


Related tutorials

How to Replace the Engine Oil and Oil Filter on the MV Agusta F4
How to Replace the Engine Oil and Oil Filter on the MV Agusta F4
F4 1000r Discover the main instructions for performing the routine maintenance service of the oil change and oil filter on the MV Agusta F4 motorcycle. First,…
How to replace the exhaust on the MV Agusta F4 1000R?
How to replace the exhaust on the MV Agusta F4 1000R?
F4 1000r You can replace the exhaust on the MV Agusta F4 1000R by loosening the screws that secure it to the respective supports at the rear mudguard. Once th…
How to Remove the Seats on the MV Agusta F4 1000R
How to Remove the Seats on the MV Agusta F4 1000R
F4 1000r Follow this guide for instructions on removing the seats (rider and passenger) of the MV Agusta F4 1000R motorcycle. First, place the motorcycle on a…

How to Replace the Headlight Bulb of a Triumph Speed Twin?

To replace the headlight bulb of the Triumph Speed Twin, you need to loosen the screws that secure the headlight unit in place: these screws will be located at the bottom right and bottom left of the headlight unit. Once these are loosened, you can proceed to pull the headlight from its housing and disconnect the connectors inside: the corresponding bulb can now be extracted from inside the headlight unit, allowing you to insert the new one, remounting all the parts you just removed.

Watch the video!


by ScegliAuto

More videos