Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. : Alternator

Alternator - DIY video guides

Beta 350
Removing the Alternator Box on Beta 4t 350-500 RRS
First, unscrew the bolt related to the gear lever using an 8 mm spanner and remove it. Disconnect the duct leading to the stator box by loosening the clamp or …Read all…
Posted on 19 June 2026 by ScegliAuto
Mvagusta F4 1000r
Replacing the Stator on MV Agusta F4
On the MV Agusta F4, the stator is located beneath the fuel tank. To access it, first remove the seat and the left side fairing next to it. Once done, as shown …Read all…
Posted on 26 May 2026 by ScegliAuto
Bmw R 1200 Gs
Replacing the Alternator Belt on BMW R 1200 GS
First, as clearly shown in the video, remove the lower front fairing in front of the engine compartment. This will give you access to the central bolt that …Read all…
Posted on 20 May 2026 by ScegliAuto
Moto Guzzi Le Mans 1000
Removing the Alternator on a Moto Guzzi Le Mans 1000
Today, in this video tutorial, we will see how to remove the alternator from a Moto Guzzi Le Mans 1000. First, remove the plastic cover found at the front of …Read all…
Posted on 25 April 2026 by ScegliAuto

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos