Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
Position the motorcycle on a stand, engage a gear, and remove the safety lock. Remove the rear wheel nut using the brake as leverage and take off the wheel. Remove the safety cap from the bleed valve and connect the brake fluid extractor. Using a 6 mm socket, unscrew the bolts of the brake caliper, then detach it from the disc. With an 8 mm spanner, remove the brake fluid reservoir (place a cloth underneath). Open the lid using a cross-head screwdriver. Position the appropriate tool between the brake pads and begin bleeding as clearly shown in the video.

Updated on 30 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Coolant in the Mv Agusta Brutale 800
How to Replace the Coolant in the Mv Agusta Brutale 800
Brutale 800 In this tutorial, you will learn how to replace the coolant in the Mv Agusta Brutale 800 motorcycle. First, remove the screws from the plastic fairin…
How to Replace the Coolant Reservoir on an MV Agusta Brutale 800
How to Replace the Coolant Reservoir on an MV Agusta Brutale 800
Brutale 800 This guide explains how to disassemble and replace the coolant reservoir on an MV Agusta Brutale 800. First, place your bike on a stand and begin by …
How to top up the coolant of the MV Agusta Brutale 800.
How to top up the coolant of the MV Agusta Brutale 800.
Brutale 800 In this guide, we will go over the instructions that will allow us to top up the engine coolant of the MV Agusta Brutale 800. First, let's place the …

How to Remove the Engine from the Piaggio Vespa GTS 250 - 300

In this guide, you will learn how to remove the engine block from the body of the Piaggio Vespa GTS 250 and GTS 300. First, place your scooter on the centre stand and begin by removing the exhaust silencer by unscrewing the bolts; then, unscrew the central bolt of the wheel hub and remove the entire wheel, as shown in the video. At this point, disconnect the suspension from the engine block by detaching the fuel lines and various wiring; then, remove the engine block, applying the reverse procedure for reassembly!

Watch the video!


by ScegliAuto

More videos