Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
Here are the main instructions for removing and replacing the silent block of the crown on the Mv Agusta F3. First, place the motorcycle on the centre stand and lift the rear wheel off the ground with the appropriate stand; then, remove the central nut of the wheel and unscrew the fixing bolts of the crown, disconnecting the drive chain as shown in the video. At this point, remove and replace the silent block with a new one, then reassemble the crown and finally adjust the chain, following the video tutorial to the end!

Updated on 24 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Exhaust Valve on a MV Agusta F3 800?
How to Replace the Exhaust Valve on a MV Agusta F3 800?
F3 800 To replace the exhaust valve on a MV Agusta F3 800, loosen the screws that secure the valve: it will be accessible from the right side of the bike, l…
How to Replace the Front Indicator Bulb on a MV Agusta F3 800?
How to Replace the Front Indicator Bulb on a MV Agusta F3 800?
F3 800 To replace the front indicator bulb on a MV Agusta F3 800, extract the bulb from its housing located at the central lower part of the bike's nose. On…
How to Replace the Exhaust on the MV Agusta F3 800?
F3 800 To replace the exhaust on the MV Agusta F3 800, remove the plastic cover located on the right side of the bike, just before the exhaust. Under this c…

How to Replace the Front Headlight on the Husqvarna 701?

In this tutorial, you will see how to replace the front headlight on the Husqvarna 701, a very simple and quick operation. First, ensure that the key is not inserted, then position yourself in front of the motorcycle, locate the four bolts on either side of the headlamp, and unscrew them using a Torx T30 key. Next, pull the entire assembly towards you, separate it from the support, and disconnect the power connector. At this point, you can separate the headlight from the panel, position the replacement, and reassemble everything by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos