Do it yourself
Frequently asked questions about cars and motorcycles

How to reset the AdBlue warning light on the Nissan Qashqai

Model: Nissan Qashqai J12 - Years 2021-2026
Part: AdBlue warning light

When the AdBlue system warning light comes on in a Nissan Qashqai vehicle, it means that it is necessary to top up the liquid inside the tank. To top up, we must open the fuel door and remove the blue cap of the AdBlue tank, insert the funnel provided with the canister and pour the entire contents inside. Then close the cap and the fuel door, go inside the vehicle and close the doors. Turn on the instrument panel and press the reset button, located on the central dashboard; hold it down until the reset is complete and then turn off the panel. Complete the reset by starting the engine and revving the engine for a few minutes.

Posted on 25 October 2024 by ScegliAuto

This video is currently unavailable

Related tutorials

Nissan Qashqai (2014-2022 / J11) Below we will see the instructions that will allow us to reset the AdBlue warning light of the Nissan Qashqai. In order to reset the AdBlue refill wa…
Nissan Qashqai (2014-2022 / J11) Today we will explain how to reset the AdBlue light of the Nissan Qashqai. Before starting the reset of the light, we must top up the liquid in the t…
Nissan Qashqai (2014-2022 / J11) Hello everyone! Today we will explain how to reset the important AdBlue additive warning light on your Nissan Qashqai. Reset through the dashboard me…

Other guides you may be interested in

    Frequently Asked Questions

    • Qashqai 2014-2022 - How much AdBlue does the Nissan Qashqai contain? Read answer
    • Qashqai 2014-2022 - How many km can a Nissan Qashqai travel with a full tank of AdBlue? Read answer
    • Qashqai 2014-2022 - What causes the AdBlue malfunction on the Nissan Qashqai? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos