|
Do it yourself
| |||
| ||||
How to reset the AdBlue warning light on a Nissan Qashqai
Model: Nissan Qashqai
J11
- Years 2014-2022
In this video, we will see how to reset the adBlue warning light on the Nissan Qashqai: after filling the adBlue tank to the recommended level by the Manufacturer, we use a diagnostic tool such as Launch or DDT4all. Now let's see how to perform the test with the diagnostic tools: Start the instrument panel, then we will need to reset the mileage warning zone, then turn off the engine and wait for three minutes. After the reset, the adBlue range should increase by about 800 km, which is the maximum distance that can be obtained with this system. If the warning light continues to stay on, then the problem is either the tank or the injector. As a general recommendation, it is better to avoid completely running out of adBlue, because at that point the system needs to be reset at the workshop, while through the diagnostic tool it is possible to perform the reset.
Posted on 16 August 2024 by ScegliAuto
Video tutorial
Related tutorials
Nissan Qashqai
(2014-2022 /
J11)
Today we will explain how to reset the AdBlue light of the Nissan Qashqai. Before starting the reset of the light, we must top up the liquid in the t…
Nissan Qashqai
(2014-2022 /
J11)
Below we will see the instructions that will allow us to reset the AdBlue warning light of the Nissan Qashqai. In order to reset the AdBlue refill wa…
Nissan Qashqai
(2014-2022 /
J11)
Hello everyone! Today we will explain how to reset the important AdBlue additive warning light on your Nissan Qashqai. Reset through the dashboard me…
Other guides you may be interested in
|
Frequently Asked QuestionsHow to Open a Stuck Boot on the Peugeot 407?
On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.160
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |