Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to check if the Touch Screen of the Nissan Qashqai J11 is defective

Model: Nissan Qashqai J11 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Onboard computer

See other generations:
Video tutorial

In this video we can see how to check if the touch screen of the Nissan Qashqai J11 is defective, or if it just needs calibration: hold down the configuration button located on the right side of the screen, and rotate the knob to the right and left several times.

Now touch the configuration button on the screen and click on the calibration mode, which is the first option that opens among the possible ones.

We must now touch the orange crosses, where the screen proposes them, until the unit says that the screen has been calibrated correctly. If we do not get the calibration menu, or at the end of the calibration the screen tells us that the calibration has failed, then it means that the screen is defective.


Posted on 22 July 2025 by ScegliAuto


Related tutorials

Setting the Time on Nissan Qashqai
Setting the Time on Nissan Qashqai
Nissan Qashqai (2014-2022 / J11) Changing the time and date on the Nissan Qashqai J11 is really straightforward, and now we will show you how. Turn on the instrument cluster but not …
How to set the clock of the Nissan Qashqai?
How to set the clock of the Nissan Qashqai?
Nissan Qashqai (2014-2022 / J11) To adjust the clock of the Nissan Qashqai, turn on the instrument panel so that you can use the screen located in the centre of the dashboard: here y…
How to Set the Time in the Nissan Qashqai?
How to Set the Time in the Nissan Qashqai?
Nissan Qashqai (2014-2022 / J11) In this tutorial, you will learn how to set the time in the Nissan Qashqai, a very simple and quick operation to perform after a flat battery or when…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos