Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to check the tire pressure of the Nissan Juke

Model: Nissan Juke MK 1 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Checks and maintenance

See other generations:
Video tutorial

The Nissan Juke contains an emergency kit for checking tire pressure. The kit is stored in the trunk under the carpet cover along with the spare tire.

We open the kit and assemble the gas cylinder. We connect the pump to the tire valve and the cable to the opening next to the vehicle's ignition button.

We inflate the tire following the instructions on the emergency kit and not on the manufacturer's label, this emergency procedure allows us to get from point A to point B without damaging the rim but it is important to go immediately to a tire shop or authorized Nissan workshop for a check-up.


Posted on 30 August 2025 by ScegliAuto


Related tutorials

Resetting the tyre pressure of the Nissan Juke
Resetting the tyre pressure of the Nissan Juke
Nissan Juke (2019-2026 / MK 2) When the load conditions of the Nissan Juke change, you must adjust the tyre pressure values accordingly: for reference, you will find a label on the…
How to reset the tyre pressure light on a 2014 Nissan Juke?
How to reset the tyre pressure light on a 2014 Nissan Juke?
Nissan Juke (2010-2019 / MK 1) Inside the cabin of the 2014 Nissan Juke, on the right side next to the steering wheel, there is a button panel with some very useful functions. One …
How to Adjust the Tyre Pressure of the Nissan Juke
How to Adjust the Tyre Pressure of the Nissan Juke
Nissan Juke (2010-2019 / MK 1) The tyre pressure of the Nissan Juke must be adjusted according to the parameters indicated by the manufacturer. These parameters are found on a labe…

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos