Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Nissan
  4. :
  5. Micra
  6. : How to remove the fuel filter on a Nissan Micra

Nissan Micra - Video tutorial

Model: Nissan Micra K12 - Years 2002-2010
Part: Petrol filter
Operation: How to remove the fuel filter on a Nissan Micra

Let's see how to remove the fuel filter mounted on a Nissan Micra: we lift the car on a column bridge or a special jack, we identify the fuel filter (as in the video); with a socket wrench we unscrew the pin that tightens the clamp (we can also use a fixed wrench) placed near the container. Once the fuel filter has been removed, remove it from the car (replace it with a new filter). Finally we put the filter back into the fuel filter container (we connect hoses and cables) and we tighten the pin with the clamp. Finally, we close the front hood.


Posted on 10 November 2023 by ScegliAuto



How to replace the Nissan Micra fuel filter?
Nissan Micra (1992-2002 / K11) In order to replace the Nissan Micra fuel filter, you have to open the hood, so that you can have access to the components inside the engine compartm
How to replace the fuel filter on Nissan Micra K11
Nissan Micra (1992-2002 / K11) In today's video tutorial we will see how to remove and replace the fuel filter on Nissan Micra K11, first series, in simple and quick steps. First o
Replacing the fuel filter on Nissan Micra
Nissan Micra (2002-2010 / K12) Working with the engine off and with the handbrake engaged, lift the front hood and locate the fuel filter well shown at the beginning of the video:

    Frequently Asked Questions

    • Micra 2002-2010 - Where is the fuel filter located in the 2004 Nissan Micra? Read Answer
    • Micra 2002-2010 - Where is the Nissan Micra fuel filter located? Read Answer
    • Micra 1992-2002 - Nissan Micra k11 fuel filter where is it? Read Answer
    • Micra 2002-2010 - Where is the Nissan Micra k12 petrol filter located? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos