Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the fuel filter of the Nissan Micra 1.4

Model: Nissan Micra K12 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Fuel filter

See other generations:
Video tutorial

Today we will see the steps that will allow us to disassemble and replace the fuel filter of the Nissan Micra 1.4. First of all, we open the hood and disconnect the battery as a precaution; then we open the rear doors and remove the seat bench, as shown in the video.

At this point, we remove the fuel pump cover, disconnecting the gasoline pipe and the electrical connector; we unscrew the pump ring to remove it, replacing it with the new original one; we connect it and start the engine!


Posted on 18 October 2025 by ScegliAuto


Related tutorials

Where is the OBD port of the Nissan Micra K13 located?
Where is the OBD port of the Nissan Micra K13 located?
Nissan Micra (2010-2017 / K13) If you want to locate the OBD port inside your Nissan Micra K13, all you have to do is follow the steps described in the following guide. First of al…
How to Remove the Front Bumper of a Nissan Micra
How to Remove the Front Bumper of a Nissan Micra
Nissan Micra (1992-2002 / K11) Before you start, open the front bonnet of your Nissan Micra. Next, unscrew and remove the bolts securing the front lights to the frame. Then, discon…
Where to Find the Fuse Box of the 2016 Nissan Micra
Where to Find the Fuse Box of the 2016 Nissan Micra
Nissan Micra (2010-2017 / K13) To locate the fuse box of your 2016 Nissan Micra, carefully follow these instructions and put them into practice. First, switch off the car and ensur…

Other guides you may be interested in

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos