Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Fuel Filter on a Nissan Micra K1

Model: Nissan Micra K12 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Fuel filter

See other generations:
Video tutorial

Here’s how to replace the fuel filter on a Nissan Micra: disconnect the negative battery terminal and open the fuel tank cap. Remove the rear seat by unfastening it from its location, unscrew the two screws holding the frame from both the passenger compartment and the boot side, fold the backrest down and rotate everything upwards.

On the right side of the floor, you will see the cover accessing the tank; unscrew the three screws to remove it after cleaning the work area.

Spray some cleaning spray and use compressed air on the filter cap, disconnect the electrical connector and the fuel line, using an absorbent cloth to avoid spills. Using the appropriate spanner, unscrew the collar holding the filter and once removed, place it in a container.

Fit the float arm onto the new filter and install it in its location, paying attention to the reference notch, fit the gasket and re-screw the collar aligning the arrow on the housing. After cleaning, reconnect the fuel line and the electrical connector.

Reconnect the negative terminal and try to start the engine; once confirmed it’s working properly, close the floor cap and reinstall the rear seat.


Updated on 24 August 2026 by ScegliAuto


Related tutorials

Nissan Micra (1992-2002 / K11) In today's tutorial, you will learn how to remove and replace the fuel filter on a first series Nissan Micra K11 in simple and quick steps. First, op…
Nissan Micra (2002-2010 / K12) Here’s how to remove the fuel filter mounted on a Nissan Micra: lift the car on a column lift or suitable jack, locate the fuel filter (as shown in t…
Nissan Micra (1992-2002 / K11) To replace the fuel filter on the Nissan Micra, open the bonnet to access the components inside the engine bay: the filter is located at the rear, ju…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos