Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Timing Belt from a Nissan Juke

Model: Nissan Juke MK 1 - Years 2010-2019
Part: Timing belt

How do you remove the timing belt from a Nissan Juke? Raise the car on a column lift and remove the front wheel, using a screwdriver to detach the right wheel arch liner. Once these operations are complete: lift the bonnet, remove the engine soundproofing panel and the timing belt cover (from the wheel arch). Use a suitable spanner to loosen the tensioner pulley and slide the belt off its seat. After fitting the new belt, use the spanner to tension the tensioner pulley, adjusting until the correct tension is achieved on the belt (previously fitted). Finally, check the tensioner and the belt itself, tightening everything with a socket spanner.

Updated on 11 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Timing Belt on a Nissan Juke
How to Replace the Timing Belt on a Nissan Juke
Nissan Juke (2010-2019 / MK 1) To replace the timing belt on a Nissan Juke, access the left side of the engine block by opening the bonnet. Once any obstructing parts have been rem…
Guide to Replacing the Timing Chain on the Nissan Juke 1.6
Guide to Replacing the Timing Chain on the Nissan Juke 1.6
Nissan Juke (2010-2019 / MK 1) Today's main steps will show you how to remove and replace the timing chain on the Nissan Juke 1.6. First, open the vehicle's bonnet and start removi…
How to remove the timing chain cover of the Nissan Juke 1.6
How to remove the timing chain cover of the Nissan Juke 1.6
Nissan Juke (2010-2019 / MK 1) In this guide, we will see the steps that will allow us to remove the timing chain cover of the Nissan Juke 1.6. First, lift the vehicle and start by…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos