Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Nissan
    3. :
  3. Almera
    4. : Replacing the tappet cover gasket

Nissan Almera - Video tutorial

Model: Nissan Almera N16, MK 2 - Years 2000-2008
Part: Engine
Operation: Replacing the tappet cover gasket

Failure of the tappet cover gasket is a fairly frequent defect and causes oil to escape which then stains the whole engine, also generating bad smells that can often end up in the passenger compartment; the replacement of this gasket is very simple: once the cover has been removed, remove the old gasket and remove any residual dirt and encrustation; then place the new gasket in the special groove obtained just under the edge of the cover, then apply sealant mastic at the corners, position the cover and tighten the relative fixing pins.


Posted on 10 September 2023 by ScegliAuto

How to reset the Jeep Renegade Passive Entry light

The guide shows how to reset the Passive Entry system, stylized by a key shaped light with three lines of WiFi is shown next to the mileage. This system allows the vehicle to be switched on without having to use the supplied keys. The reset must be performed keeping the keys inside the vehicle. In fact, with the instrument panel off, it will be necessary to press the ignition button located on the keys and then the brake pedal. At this point it is necessary to press the power button on the dashboard. At this point, wait five minutes before starting the vehicle normally.

Watch the video!


by ScegliAuto

More videos