Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Air Flow Meter

Model: Nissan Almera N16, MK 2 - Years: 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008
Part: Engine

See other generations:
Video tutorial

If there are starting problems with the engine and its RPM is irregular, with performance significantly below average, the issue likely lies with the air flow meter; additionally, if the engine warning light remains on, you can check the fault memory to see the stored fault code: in this case, the anomaly refers specifically to the air flow meter; this sensor is located just below the air filter housing and is secured with three screws: disconnect the connector, unscrew the fixing screws, remove the sensor from its housing, and install the new one by tightening the fixing screws and reconnecting the connector; clear the fault memory and ensure that the engine warning light remains off.


Updated on 14 February 2026 by ScegliAuto


Related tutorials

Replacing the Timing Chain on the Nissan Almera
Replacing the Timing Chain on the Nissan Almera
Nissan Almera (2000-2008 / N16, MK 2) Here are the main instructions for replacing the timing chain on the Nissan Almera. First, open the bonnet of your car and start by removing the batt…
Guide to Replacing the Radio in the Nissan Almera
Guide to Replacing the Radio in the Nissan Almera
Nissan Almera (2000-2008 / N16, MK 2) Today, let's go through the instructions for removing and replacing the standard radio in the Nissan Almera in simple, quick steps. First, get in the…
Changing Brake Discs and Pads
Changing Brake Discs and Pads
Nissan Almera (2000-2008 / N16, MK 2) To change the brake pads, first lift the vehicle on a support and remove the wheel from the axle in question. Use a large screwdriver to push the pis…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos