Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Air Filter on a Nissan Almera

Model: Nissan Almera N16, MK 2 - Years: 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008
Part: Air filter

See other generations:
Video tutorial

If you need to replace the engine air filter on this vehicle, below you will find all the steps and necessary information for the replacement, and you can also check the video. First, open the bonnet.

The cabin filter is located in the upper central part of the engine bay just below the windscreen. Next, unclip the retaining clips of the cover to lift it off, then extract the filter and replace it with a new one of the same specifications.

Finally, reattach the filter cover and you're done.


Updated on 26 July 2026 by ScegliAuto


Related tutorials

How to Replace the Cabin Air Filter on a Nissan Almera?
How to Replace the Cabin Air Filter on a Nissan Almera?
Nissan Almera (2000-2008 / N16, MK 2) The cabin air filter on a Nissan Almera is located on the driver's side, specifically adjacent to the pedals. To remove it, first take off the plasti…
Removing the Switch Panel from a Nissan Almera Door
Nissan Almera (2000-2008 / N16, MK 2) Is the switch panel on your Nissan Almera faulty and needs replacing? Here's how to remove it from the top of the panel. Using a plastic or metal lev…
Removing the Door Panel on a Nissan Almera
Removing the Door Panel on a Nissan Almera
Nissan Almera (2000-2008 / N16, MK 2) In this video, you will see how to replace the door panel on a Nissan Almera. First, open the door and remove the screws located along the edge of th…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos