Do it yourself
| ||||
|
Nissan Juke - Video tutorial
Model: Nissan Juke
MK 1
- Years 2010-2019 In order to replace the timing belt on the Nissan Juke, you need to access the left side of the engine block by opening the bonnet. Once the bulkheads have been removed and the engine side cover has been detached, it will be possible to access the pulleys and especially the tensioner pulley. All these must be loosened by unscrewing their central pins, so that the belt tension is reduced and it can be extracted from its housing. After removing the old belt, it will be possible to insert a new one by fitting all the removed components.
Posted on 1 December 2022 by ScegliAuto
Other guides that may interest you
|
Frequently Asked QuestionsHow do I unlock the fuel filler flap of the Opel Meriva B?To be able to unlock the fuel filler flap of the Opel Meriva B when it is locked, you need to have an object that acts as a lever to be able to move the inner wheel arch cover. By inserting your hand inside, you will need to pull the latch that blocks the door from the inside, as shown in the video. The fuel flap can be opened by pulling the latch from the inside. The problem depends on the motor of the mechanism: by going to the dealership it will be possible to replace the entire piece, which will be under warranty for two years and will allow you to refuel in peace. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.035
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |