|
Do it yourself
| |||
| ||||
How to Replace Glow Plugs on the Nissan X-Trail 1.6 dCi
Model: Nissan X Trail
MK 3, T32
- Years:
2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Video tutorial
To replace the glow plugs on a Nissan X-Trail 1.6 dCi (R9M engine), take care to avoid breaking them. The typical symptom is the engine light on with codes P0380-P0384. Generously spray a penetrating fluid (like Liqui Moly) around the glow plugs and let it sit, preferably overnight, to soften any deposits and carbon. Disconnect the battery and remove the electrical connectors from the glow plugs by gently pulling the tab. For removal, use a long 10 mm socket (the glow plugs are M10x1) and a torque wrench. Loosen carefully: the torque is 15-20 Nm, but after years of carbon, they may be tougher. If they do not unscrew easily, do not force them: they risk breaking, making removal a nightmare. Before installing the new ones, check their functionality by briefly connecting them to the battery: they should glow red. For installation, apply a specific glow plug grease, such as LiquiMoly Pro-Line available on Amazon with code B01FHTGWZK for £13.96, with free delivery. Screw in by hand and tighten to 15 Nm with the torque wrench. Reconnect the connectors. After replacement, clear the error codes with a scanner. Symptoms of faulty glow plugs include difficulty starting in cold weather, white smoke from the exhaust, and irregular idle.
Posted on 1 October 2026 by ScegliAuto
Related tutorials
Nissan X Trail
(2014-2023 /
MK 3, T32)
.. and replace the diesel filter on the Nissan X-Trail 1.6 dCi. First, open the bonnet of the vehicle and locate the diesel filter, which is situated.. …
Nissan X Trail
(2001-2006 /
T30, MK 1)
Today, we will see the procedure to remove and replace the diesel filter of the Nissan X-Trail 2.2 DCI. First, open the bonnet of the vehicle and sta…
Nissan X Trail
(2001-2006 /
T30, MK 1)
In this tutorial video, see how to replace the spark plugs in a Nissan X-TRAIL T30 by following a few simple steps: first, purchase new spark plugs f…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.
Other guides you may be interested in
|
Resetting the Service Light on the Mitsubishi Canter
When it is necessary to change the engine oil of the Mitsubishi Canter, a warning on the dashboard alerts us to this requirement. Once this maintenance task is completed, you must reset the control system. Sit in the driver's seat and turn on the instrument panel. Without starting the engine, press and hold the accelerator pedal for twenty seconds. After this time interval, while still holding the accelerator pedal, pump the brake pedal six times. Once done, the warning on the instrument panel will turn off, confirming the reset. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.049
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy - About us VAT number: IT01247470535 |