Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace Glow Plugs on a Nissan X-Trail

Model: Nissan X Trail MK 1, T30 - Years: 2001, 2002, 2003, 2004, 2005, 2006
Part: Glow plugs

See other generations:
Video tutorial

In this video tutorial, you will see how to replace the glow plugs on a Nissan X-Trail. Lift the bonnet and secure it with the appropriate prop rod; remove the parts to access the glow plugs.

Diesel engine glow plugs do not need to be replaced after a certain mileage, as they serve their purpose for a limited time, only during engine start-up, preheating the combustion chamber. If the glow plugs are not functioning properly in low temperatures, the car may struggle to start, and the battery will quickly drain.

By conducting a test, you will see that the new glow plugs become incandescent immediately (this test should be done to avoid installing a faulty glow plug). Spray a bit of penetrating fluid on the glow plugs before unscrewing them to clean the threads of carbon deposits.

To screw in the glow plugs, use a torque wrench.


Updated on 14 July 2026 by ScegliAuto


Related tutorials

How to Replace Spark Plugs in a Nissan X-TRAIL T30
How to Replace Spark Plugs in a Nissan X-TRAIL T30
Nissan X Trail (2001-2006 / MK 1, T30) .. see how to replace the spark plugs in a Nissan X-TRAIL T30 by following a few simple steps: first, purchase new spark plugs from an authorised dealer;.. …
Where is the fuse box of the Nissan X Trail T30 located?
Where is the fuse box of the Nissan X Trail T30 located?
Nissan X Trail (2001-2006 / MK 1, T30) .. guide dedicated to all of you who own a Nissan X Trail T30, we will describe the various steps you need to take to locate the fuse box of the vehicle... …
How to Replace the Key Battery of the Nissan X Trail
How to Replace the Key Battery of the Nissan X Trail
Nissan X Trail (2007-2014 / MK 2, T31) .. To replace the battery of the Nissan X Trail key, lift the metal side key and insert a flat-head screwdriver into the hole to apply slight pressure,.. …

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos