Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Glow Plugs on a Nissan Qashqai 1.5 dCi

Model: Nissan Qashqai J11 - Years 2014-2022
Part: Glow plugs

This guide provides instructions to remove and replace the glow plugs on a Nissan Qashqai 1.5 dCi. First, open the vehicle's bonnet and begin disconnecting the turbocharger hose to access the glow plugs; disconnect the pressure sensor tube and the connectors of the glow plugs, as shown in the video. At this point, use a socket wrench to unscrew and remove the glow plugs, replacing them with new original ones (screwing by hand and tightening gently); finally, start the engine!

Posted on 12 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Glow Plugs on the Nissan Qashqai 1.5 DCI
Replacing the Glow Plugs on the Nissan Qashqai 1.5 DCI
Nissan Qashqai (2006-2014 / J10) Today, discover the instructions for removing and replacing the glow plugs in the engine of the Nissan Qashqai 1.5 DCI. First, open the bonnet of you…
Replacing the Glow Plugs on a Nissan Qashqai 2.0 DCI
Replacing the Glow Plugs on a Nissan Qashqai 2.0 DCI
Nissan Qashqai (2006-2014 / J10) The following steps will guide you through removing and replacing the glow plugs on a Nissan Qashqai 2.0 DCI. First, open the bonnet of your car and …
Replacing Glow Plugs on a Nissan Qashqai
Replacing Glow Plugs on a Nissan Qashqai
Nissan Qashqai (2006-2014 / J10) Replace the damaged glow plugs on a Nissan Qashqai. Pull the lever to open the engine bay and lift the front bonnet, securing it. Remove the plastic …

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos