Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Glow Plugs on a Nissan Qashqai 2.0 DCI

Model: Nissan Qashqai J10 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Glow plugs

See other generations:
Video tutorial

The following steps will guide you through removing and replacing the glow plugs on a Nissan Qashqai 2.0 DCI. First, open the bonnet of your car and disconnect the intake duct located at the top. Then, disconnect the connectors from the glow plugs and use a socket wrench with an extension to unscrew and remove them, as shown in the video.

Next, install the new glow plugs of the correct type and with the same thread pitch; reconnect them and refit the duct!


Updated on 2 July 2026 by ScegliAuto


Related tutorials

Replacing the Glow Plugs on the Nissan Qashqai 1.5 DCI
Replacing the Glow Plugs on the Nissan Qashqai 1.5 DCI
Nissan Qashqai (2006-2014 / J10) Today, discover the instructions for removing and replacing the glow plugs in the engine of the Nissan Qashqai 1.5 DCI. First, open the bonnet of you…
How to Replace the Glow Plugs on a Nissan Qashqai 1.5 dCi
How to Replace the Glow Plugs on a Nissan Qashqai 1.5 dCi
Nissan Qashqai (2014-2022 / J11) This guide provides instructions to remove and replace the glow plugs on a Nissan Qashqai 1.5 dCi. First, open the vehicle's bonnet and begin disconn…
Replacing Glow Plugs on Nissan Qashqai 1.5 DCi
Replacing Glow Plugs on Nissan Qashqai 1.5 DCi
Nissan Qashqai (2006-2014 / J10) In today's tutorial video, we will show you how to disassemble and replace the glow plugs on a Nissan Qashqai 1.5 DCi, first series. First, open and …

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos