Do it yourself
| ||||
|
Nissan Qashqai - Video tutorial
Model: Nissan Qashqai
J10
- Years 2006-2014 In this tutorial, we can see how to replace the glow plugs in the Nissan Qashqai, a very simple and quick operation. First of all, make sure that the engine is cool enough, then open the hood and remove the plastic cover. Next, disconnect the battery, remove the oil dipstick, and disconnect the EGR valve duct. At this point, all that's left is to remove the glow plugs, apply some penetrating spray to them, and gently unscrew them using the appropriate 10mm wrench. To install the new parts, simply follow the reverse procedure.
Posted on 12 February 2024 by ScegliAuto
Other guides that may interest you
|
Frequently Asked QuestionsHow to reset the TPMS light of the Volkswagen Polo 2011The orange tire light indicates the presence of one or more tires with an inflation pressure below the recommended limit. All this is easily solved by inflating them correctly or replacing them in the event of a puncture. After carrying out these operations it is necessary to reset the warning light and therefore also the sensor in order to have new reading data. All you have to do is start the car ignition and then fully open the glove compartment on the passenger side. Locate the two buttons in the right corner and press "Set". At this point the reset is complete and you can turn off the ignition. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.046
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |