Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Nissan
  4. :
  5. Qashqai
  6. : How do you replace spark plugs on a Nissan Qashqai?

Nissan Qashqai - Video tutorial

Model: Nissan Qashqai J11 - Years 2014-2022
Part: Spark plugs
Operation: How do you replace spark plugs on a Nissan Qashqai?

To be able to replace the spark plugs on your Nissan Qashqai you have to go and open the hood so that you can access the upper part of the engine block. Here will be the wires connected to the coils that will need to be disconnected so the ignition coils can be pulled out of their housing. After removing the coils, the underlying spark plugs can be extracted using a socket wrench. After the old spark plugs have been removed, it will be possible to insert the new ones in their seats, also positioning the coils and connecting them to the cables.


Posted on 12 December 2022 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos