Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Spark Plugs from a Nissan Qashqai

Model: Nissan Qashqai J10 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Spark plugs

See other generations:
Video tutorial

Do you want to remove the spark plugs from your Nissan Qashqai? Let's see how to do it in this video. Pull the lever to open the engine compartment and lift the front bonnet, securing it. Remove the plastic soundproofing panel covering the engine, then disconnect the exhaust connector and remove it from its seat.

Disconnect the clips from the coils by hand, unscrew the coils with your socket wrench, and pull them out of the cylinder head. Take the new spark plugs and guide them with the extension of the socket wrench into the engine head, tighten them and reconnect the respective power clips.

Finally, reassemble the connector and the soundproofing panel along with the attached parts.


Updated on 28 February 2026 by ScegliAuto


Related tutorials

What Does the Error Code for Glow Plugs on a Nissan Qashqai Indicate?
What Does the Error Code for Glow Plugs on a Nissan Qashqai Indicate?
Nissan Qashqai (2006-2014 / J10) The error code P0380 refers to a malfunction of the glow plugs. The activation of this error code via diagnostic testing indicates the need to replac…
Spark Plug Replacement on Nissan Qashqai
Nissan Qashqai (2006-2014 / J10) Replacing the spark plugs on a Nissan Qashqai? Let’s look at the disassembly of the components. Open and lift the front bonnet, remove the soundproof…
How to Replace the Spark Plugs on a Nissan Qashqai?
How to Replace the Spark Plugs on a Nissan Qashqai?
Nissan Qashqai (2014-2022 / J11) To replace the spark plugs on a Nissan Qashqai, open the bonnet to access the top of the engine block. Here, you will find the cables connected to th…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos