Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Nissan
    3. :
  3. Qashqai
    4. : How to replace the ignition coil on the Nissan Qashqai.

Nissan Qashqai - Video tutorial

Model: Nissan Qashqai J10 - Years 2006-2014
Part: Coil
Operation: How to replace the ignition coil on the Nissan Qashqai.

Let's see how to replace the ignition coil on the Nissan Qashqai J10 version: first, we need to disconnect the flexible tube from the ventilation system base from the air duct, then unscrew the clamp and fastening elements of the air filter intake pipe. Disconnect the air intake pipe from its housing, and the fastening elements that connect the throttle valve to the intake manifold. Disconnect the clamp and remove the connector and vacuum tube from the intake manifold near the throttle valve, then unscrew the fastening elements of the intake manifold support bracket. Disconnect the vacuum tube amplifier from the intake manifold, then remove the fastening elements of the intake manifold, which we will then remove. Cover the intake manifold with a cloth to prevent dust and dirt from entering. Now we can remove the ignition coil connector by unscrewing the bracket that supports the coil. Remove the ignition coil from the spark plug housing; now we need to clean dirt, dust, and debris from inside the spark plug housing. Install the new ignition coil; we should hear a "click" indicating that it is securely in place. Connect the connector and tighten the fastening elements. Remove the cloth that we placed on the intake manifold and remove the gasket; we will replace it with a new one. Now put it back in place, tightening the fastening elements, including the support bracket. Now it's time for the vacuum tube amplifier, to be connected to the intake manifold, then to the throttle valve. All that's left is to connect the connector and vacuum tube to the intake connector near the throttle valve, then connect the air intake pipe to the air filter housing. Connect the flexible tube from the ventilation system base to the air duct. Tighten the clamp and fastening elements of the air filter intake pipe. Start the engine for a few minutes to ensure that everything is functioning correctly.


Posted on 29 October 2023 by ScegliAuto

Other guides that may interest you

How to reset the tire pressure warning light on Dacia Sandero?

Let's see below how it is possible to reset the low tire pressure signal on the car: first of all it is necessary to check the correct tire pressure by comparing it with the pressures reported in the use and maintenance manual. After that, turn on the ignition and locate the command on the right side of the steering wheel at the top that allows you to access the on-board computer menu, then select the car symbol, after which select the "up arrow" command up to that the indication "tire pressure" appears on the display. At that point, press the "Ok" control on the steering wheel and keep it pressed to reset the signal.

Watch the video!


by ScegliAuto

More videos