Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Ignition Barrel of the Nissan Qashqai

Model: Nissan Qashqai J10 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014

See other generations:
Video tutorial

Follow the instructions below to remove and replace the ignition barrel of the Nissan Qashqai. First, get into the vehicle and remove the plastic cover located behind the steering wheel; then disconnect the wiring harness from the barrel and use bits to remove the pins of the ignition barrel, as shown in the video.

At this point, remove and replace the ignition barrel, or repair it; remember that you will need to replace the key if you are replacing the ignition lock!


Updated on 25 August 2026 by ScegliAuto


Related tutorials

How to Reset the Airbag Light on a Nissan Qashqai
How to Reset the Airbag Light on a Nissan Qashqai
Nissan Qashqai (2014-2022 / J11) Before you begin, enter the cabin of your Nissan Qashqai, specifically the driver's seat. Start by inserting the key into the ignition barrel and tur…
How to reset the service light in the 2012 Nissan Dualis?
How to reset the service light in the 2012 Nissan Dualis?
Nissan Qashqai (2006-2014 / J10) The service light in the Nissan Dualis, known in the European market as the Nissan Qashqai, is reset through a brief manual procedure illustrated in …
How do you reset the Nissan Qashqai car radio?
How do you reset the Nissan Qashqai car radio?
Nissan Qashqai (2006-2014 / J10) To reset the Nissan Qashqai car radio, you need to press and hold the power button of the device, located in the top right corner, while the instrume…

Other guides you may be interested in

    Frequently Asked Questions

    • Qashqai 2006-2014 - Where is the reverse switch of a Nissan Qashqai located? Read answer
    • Qashqai 2006-2014 - How to remove the ignition lock of a Nissan Qashqai? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos