Do it yourself
| ||||
|
Nissan Qashqai - Video tutorial
Model: Nissan Qashqai
J10
- Years 2006-2014 Let's find out today the instructions that will allow us to disassemble and replace the spark plugs of the Nissan Qashqai 1.5 DCI engine. First of all, we open the bonnet of our car and start disconnecting the suction hose by unscrewing the clamp screw; then we disconnect the glow plug connectors, then using a socket wrench with extension to unscrew and remove them, as shown in the video. At this point let's install the new glow plugs, of the right type and with the same pitch; we make the connection and fix the suction hose!
Posted on 6 April 2023 by ScegliAuto
Other guides that may interest you
|
Frequently Asked QuestionsHow to reset the TPMS light of the Volkswagen Polo 2011The orange tire light indicates the presence of one or more tires with an inflation pressure below the recommended limit. All this is easily solved by inflating them correctly or replacing them in the event of a puncture. After carrying out these operations it is necessary to reset the warning light and therefore also the sensor in order to have new reading data. All you have to do is start the car ignition and then fully open the glove compartment on the passenger side. Locate the two buttons in the right corner and press "Set". At this point the reset is complete and you can turn off the ignition. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.023
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |