|
Do it yourself
| |||
| ||||
How to replace the EGR valve on the Nissan Qashqai J11
Model: Nissan Qashqai
J11
- Years 2014-2022
In this video we can see how to replace the EGR valve on the Nissan Qashqai J11: it is located in the engine compartment under a series of pipes and flexible tubes, right under the engine block. For safety, it is best to disconnect the battery: we disconnect the fixing of the intake air duct, and the screw supporting the metal sheath, then disconnect the electrical connector and disconnect the plastic duct from the rubber one, then disconnect all the rubber tubes and unscrew the metal plate that supports them. We must remove the plastic air duct, covering the duct with a cloth to prevent impurities from falling into it. There is a real tangle of rigid and flexible tubes and metal plates, above this valve that we can finally see: we disconnect the valve power supply, then unscrew the valve fixing screws so that we can remove it. We can find the new piece for example on ovoko. It at code 700449 14710-00Q1L at the price of 125.00 euros + 19.46 euros for shipping costs. Now all that's left is to screw the valve screws back in and reconnect the electrical connector. But the real challenge comes when we have to put back in place the tubes, flexible tubes, metal plates, and the intake duct. Let's do it patiently and carefully and repeat the entire process in reverse.
Posted on 27 June 2025 by ScegliAuto
Video tutorial
Related tutorials
Nissan Qashqai
(2006-2014 /
J10)
Today's guide will show you the procedure for removing and replacing the EGR valve on a Nissan Qashqai, following the instructions below. First, open…
Nissan Qashqai
(2006-2014 /
J10)
Let's see in simple and quick steps the instructions that will allow us to disassemble and replace, or simply clean, the EGR valve of the Nissan Qash…
Nissan Qashqai
(2014-2022 /
J11)
In this tutorial, we can see how to disassemble the EGR valve in the Nissan Qashqai, a simple operation if you have good manual skills. First of all,…
Other guides you may be interested in
|
How to Open a Stuck Boot on the Peugeot 407?
On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.103
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |