Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to clean or replace the EGR valve of the Nissan Qashqai 1.5 dCi

Model: Nissan Qashqai J10 - Years 2006-2014
Part: EGR valve

Let's see in simple and quick steps the instructions that will allow us to disassemble and replace, or simply clean, the EGR valve of the Nissan Qashqai. First, open the hood of the car and start by removing the upper plastic cover; then disconnect the EGR valve hose, then unscrew its fixing screws to remove it, as shown in the video. At this point, clean the EGR valve with specific degreasers, replacing it if necessary with a new one, following the video tutorial until the end!

Posted on 27 May 2024 by ScegliAuto

Video tutorial

Related tutorials

Replacing the EGR Valve on a Nissan Qashqai 2.0 dCi
Replacing the EGR Valve on a Nissan Qashqai 2.0 dCi
Nissan Qashqai (2006-2014 / J10) Today's guide will show you the procedure for removing and replacing the EGR valve on a Nissan Qashqai, following the instructions below. First, open…
How to Replace the EGR Valve on a Nissan Qashqai
How to Replace the EGR Valve on a Nissan Qashqai
Nissan Qashqai (2006-2014 / J10) To replace the EGR valve on a Nissan Qashqai, open the vehicle's bonnet and locate the valve near the intake manifold, connected to the exhaust gas d…
How to Replace the EGR Valve on the Nissan Qashqai
How to Replace the EGR Valve on the Nissan Qashqai
Nissan Qashqai (2014-2022 / J11) Replacing the EGR valve on the Nissan Qashqai is a very important action to take at the first signs of failure. Start the replacement by opening the …

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos