Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the EGR Valve on the Nissan Qashqai

Model: Nissan Qashqai J11 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: EGR valve

See other generations:
Video tutorial

Replacing the EGR valve on the Nissan Qashqai is a very important action to take at the first signs of failure. Start the replacement by opening the bonnet and removing the engine cover.

Continue by removing the air intake duct from the throttle body; to do this, you will need to remove the clamp using a flat screwdriver and then pull it out. Using a 10 mm socket, undo the fixing screw of the duct and remove it. Disconnect the diesel filter pipes and finally remove the oil sensor support with an 8 mm socket.

Now, using a socket, remove the air mass meter from the valve.

Finally, with a 10 mm socket, remove the screws securing the valve. Once the screws are removed, take out the EGR valve.

Clean the air duct and the valve pipe before installing the new valve. To reinstall the EGR valve, follow the same procedure as for removal but in reverse.


Updated on 8 August 2026 by ScegliAuto


Related tutorials

Replacing the EGR Valve on a Nissan Qashqai 2.0 dCi
Replacing the EGR Valve on a Nissan Qashqai 2.0 dCi
Nissan Qashqai (2006-2014 / J10) Today's guide will show you the procedure for removing and replacing the EGR valve on a Nissan Qashqai, following the instructions below. First, open…
How to Clean or Replace the EGR Valve of the Nissan Qashqai 1.5 dCi
How to Clean or Replace the EGR Valve of the Nissan Qashqai 1.5 dCi
Nissan Qashqai (2006-2014 / J10) In simple and quick steps, here are the instructions that will allow you to remove and replace, or simply clean, the EGR valve of the Nissan Qashqai.…
How to Replace the EGR Valve on a Nissan Qashqai
How to Replace the EGR Valve on a Nissan Qashqai
Nissan Qashqai (2006-2014 / J10) To replace the EGR valve on a Nissan Qashqai, open the vehicle's bonnet and locate the valve near the intake manifold, connected to the exhaust gas d…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos