|
Do it yourself
| |||
| ||||
Throttle Body Relearning Procedure on a Nissan Vehicle
Model: Nissan Nissan Various
In this video, we can see the relearning procedure for a Nissan throttle body. There are preliminary conditions to meet: no ECU errors, which should be cleared with an OBD2 tool; no air leaks, so check the vacuum hoses, crankcase ventilation, and oil seals. The battery must be fully charged, and the engine must be at operating temperature. Reset the ECU to factory settings by disconnecting the battery for 30 seconds (you will need the PIN to restart the radio). Turn off all electronic components, position the steering straight, and do not touch the accelerator. Turn on the ignition for 2 seconds and then turn it off for 10 seconds. Turn it back on, then press and fully depress the accelerator within 5 seconds; wait 7 seconds and then press the accelerator fully for 20 seconds: the engine light will change from flashing to steady: release the accelerator within 3 seconds and start the engine, letting it run for 20 seconds. If the engine light remains off, the procedure was successful; otherwise, you must repeat everything from the beginning.
Posted on 17 March 2026 by ScegliAuto
Video tutorial
Related tutorials
Nissan Nissan Various
Disassembling the steering wheel airbag on a Nissan vehicle is a fairly simple operation to perform independently. To carry out this operation, we mu…
Nissan Nissan Various
If you own a Nissan Quest 2G and are wondering where the cabin fuse box is located, read the following procedure carefully and apply it step by step.…
Nissan Nissan Various
This video provides instructions for removing and replacing the front headlight bulb on a 2017 Nissan NV 200. First, open the bonnet of your commerci…
Other guides you may be interested in
|
How to Open a Stuck Boot on the Peugeot 407?
On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.112
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |