Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the EGR valve in the Nissan Qashqai?

Model: Nissan Qashqai J11 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: EGR valve

See other generations:
Video tutorial

In this tutorial, we can see how to disassemble the EGR valve in the Nissan Qashqai, a simple operation if you have good manual skills. First of all, we wait for the engine to be cold enough, then we open the hood and disconnect the negative terminal of the battery.

We then disassemble the intake duct by loosening the respective clamps and unscrewing the various bolts, disconnect all the cables connected to it and proceed by removing the indicated metal plate. At this point, we unscrew the fixing bolts of the valve, remove it from the housing, and install the replacement if necessary.


Posted on 15 March 2025 by ScegliAuto


Related tutorials

How to Clean or Replace the EGR Valve of the Nissan Qashqai 1.5 dCi
How to Clean or Replace the EGR Valve of the Nissan Qashqai 1.5 dCi
Nissan Qashqai (2006-2014 / J10) In simple and quick steps, here are the instructions that will allow you to remove and replace, or simply clean, the EGR valve of the Nissan Qashqai.…
Replacing the EGR Valve on a Nissan Qashqai 2.0 dCi
Replacing the EGR Valve on a Nissan Qashqai 2.0 dCi
Nissan Qashqai (2006-2014 / J10) Today's guide will show you the procedure for removing and replacing the EGR valve on a Nissan Qashqai, following the instructions below. First, open…
How to Replace the EGR Valve on a Nissan Qashqai
How to Replace the EGR Valve on a Nissan Qashqai
Nissan Qashqai (2006-2014 / J10) To replace the EGR valve on a Nissan Qashqai, open the vehicle's bonnet and locate the valve near the intake manifold, connected to the exhaust gas d…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos