Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Turbocharger on the Nissan Qashqai

Model: Nissan Qashqai J11 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Turbocharger

See other generations:
Video tutorial

If you want to proceed with a DIY replacement of the turbocharger assembly on this car model, the description below outlines the various steps to take, and you can also refer to the images in the video. After opening the bonnet, remove its cover, and at the rear of the engine, you will find the turbocharger.

Use a suitable spanner to undo the fixing bolts, then disconnect the electrical connectors and the coolant pipes. Remove the turbocharger assembly and proceed to replace it with the new one.


Updated on 28 July 2026 by ScegliAuto


Related tutorials

How to Replace the Glow Plugs on a Nissan Qashqai 1.5 dCi
How to Replace the Glow Plugs on a Nissan Qashqai 1.5 dCi
Nissan Qashqai (2014-2022 / J11) This guide provides instructions to remove and replace the glow plugs on a Nissan Qashqai 1.5 dCi. First, open the vehicle's bonnet and begin disconn…
Where to Find the OBD2 Port on a Nissan Qashqai
Where to Find the OBD2 Port on a Nissan Qashqai
Nissan Qashqai (2006-2014 / J10) To locate the OBD2 port inside your Nissan Qashqai, follow this procedure. First, enter the cabin and ensure your Nissan Qashqai is completely off, t…
How to Open the Bonnet of a Nissan Qashqai
How to Open the Bonnet of a Nissan Qashqai
Nissan Qashqai (2014-2022 / J11) Before you can start, sit in the driver's seat of your Nissan Qashqai. Begin by gently pulling towards you the lever located at the bottom left of th…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos