Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the diesel filter of the Nissan X-Trail 1.6 dCi

Model: Nissan X Trail MK 3, T32 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Diesel fuel filter

See other generations:
Video tutorial

Following these simple steps, we will see how to disassemble and replace the diesel fuel filter of the Nissan X-Trail 1.6 dCi. First of all, we open the hood of the car and start to locate the diesel fuel filter, which is located on the upper left side; then we remove the plastic cover of the filter to access it, as shown in the video.

At this point, we disconnect the fuel supply pipes from the filter, also disconnecting the electrical connector; we unscrew the bracket screw to remove and replace the diesel fuel filter with the original one, applying the reverse process for reassembly!


Posted on 26 December 2024 by ScegliAuto


Related tutorials

How to Replace the Diesel Filter of the Nissan X-Trail 2.2 DCI
How to Replace the Diesel Filter of the Nissan X-Trail 2.2 DCI
Nissan X Trail (2001-2006 / MK 1, T30) Today, we will see the procedure to remove and replace the diesel filter of the Nissan X-Trail 2.2 DCI. First, open the bonnet of the vehicle and sta…
Replacing the Diesel Filter on a Nissan X-Trail
Replacing the Diesel Filter on a Nissan X-Trail
Nissan X Trail (2001-2006 / MK 1, T30) Today, we will discover the instructions that will allow us to remove and replace the diesel filter on a Nissan X-Trail. First, open the bonnet of th…
How to Replace the Air Filter of a Nissan X-Trail
How to Replace the Air Filter of a Nissan X-Trail
Nissan X Trail (2001-2006 / MK 1, T30) Before you can start, open the bonnet of your Nissan X-Trail. Begin by unclipping the clips that secure the top cover of the air filter using a flath…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos