Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Car Radio with a Newer Model

Model: Nissan Micra K12 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Car stereo

See other generations:
Video tutorial

To access the connections of the car radio, you need to remove the upper part of the entire dashboard. Start by removing the screws located in the glove compartment above the radio.

Remove the screws located on the dashboard beneath the radio. Remove the two plastic side pillars of the roof by prising at the edges with a plastic tool to disengage the retaining pins.

Unscrew the remaining screws of the upper panel, which should be removed gently by lifting it. You can now access the connectors at the back of the radio and subsequently remove the radio itself. After replacing it, turn on the radio and check all functions offered by the new installation.


Updated on 5 February 2026 by ScegliAuto


Related tutorials

How to Replace the Car Radio in a Nissan Micra K13
How to Replace the Car Radio in a Nissan Micra K13
Nissan Micra (2010-2017 / K13) In this video tutorial, you can see how to replace the car radio in a Nissan Micra K13: to remove the car radio and replace it with a more modern one…
Instructions for Removing the Car Radio
Instructions for Removing the Car Radio
Nissan Micra (2002-2010 / K12) The first operation is to remove the plastic trim surrounding the car radio: there are two fixing screws at the bottom and another two inside the glo…
Removing the Stereo from a Nissan Micra
Removing the Stereo from a Nissan Micra
Nissan Micra (2002-2010 / K12) To remove the stereo from a Nissan Micra, follow these steps. Lift the flap at the top of the stereo and detach it from the centre console. Unscrew t…

How to open the bonnet on a Volkswagen Golf?

In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down.

Watch the video!


by ScegliAuto

More videos