Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing Rear Light on Nissan Qashqai

Model: Nissan X Trail MK 3, T32 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Tail light

See other generations:
Video tutorial

In today's video tutorial, you will learn how to remove the rear light to replace the bulbs on a third-generation Nissan Qashqai. First, obtain a plastic lever to extract the light.

Then, open the boot and unscrew the side screws of the light. Next, use a lever to unclip the light from the outside and remove it, disconnecting the electrical connector of the bulbs.

At this point, you can replace the bulbs if desired; for reassembly, simply follow the reverse procedure, placing the light back in position, reconnecting the connector, and screwing in the screws.


Updated on 29 March 2026 by ScegliAuto


Related tutorials

How to Replace the Reverse Light Bulb on a Nissan X-Trail
How to Replace the Reverse Light Bulb on a Nissan X-Trail
Nissan X Trail (2007-2014 / MK 2, T31) In this short guide, find the instructions to remove and replace the reverse light bulb on a Nissan X-Trail. First, move to the rear of the vehicle a…
How to Replace the Rear Light on the Nissan X Trail
How to Replace the Rear Light on the Nissan X Trail
Nissan X Trail (2001-2006 / MK 1, T30) This guide outlines the steps to remove and replace the rear light on the Nissan X Trail. First, open the boot lid and start unscrewing the two secur…
Replacing the Rear Light Bulbs on the Nissan X-Trail MK3
Replacing the Rear Light Bulbs on the Nissan X-Trail MK3
Nissan X Trail (2014-2023 / MK 3, T32) In this video, we see that if one of the bulbs in the rear light of the Nissan X-Trail blows, we need to replace it as soon as possible. To carry out…

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos