Do it yourself
Frequently asked questions about cars and motorcycles

Oil Change on Nissan Qashqai 1.5 DCI

Model: Nissan Qashqai J11 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Checks and maintenance

See other generations:
Video tutorial

Lift the car with a jack, unscrew the undertray cover by removing the clips, and unscrew the bolts securing it to the front bumper. Loosen the drain bolt and collect the used oil in a container.

While the oil drains, move to the top of the engine bay where, after opening the bonnet, you will unscrew the oil filter and replace it with a new one, tightening it again with a spanner. When all the old oil has drained completely, screw the drain bolt back in and fill nearly 4 litres of 5W-30 lubricant through the upper hole, checking the level with the dipstick for safety.


Updated on 1 April 2026 by ScegliAuto


Related tutorials

Nissan Qashqai (2014-2022 / J11) This short video tutorial will explain how to replace the oil filter and engine oil on the Nissan Qashqai 1.6 DCi. It is very important to use oil re…
Nissan Qashqai (2014-2022 / J11) Today, follow these instructions to help you replace the engine oil and oil filter while performing the routine maintenance service on the Nissan Qas…
Nissan Qashqai (2006-2014 / J10) Discover in this video the step-by-step instructions for removing and replacing the timing belt, and when to change it, on the Nissan Qashqai 1.5 DCI…

Other guides you may be interested in

    Frequently Asked Questions

    • Qashqai 2014-2022 - Have there been any issues reported with the 2015 Nissan Qashqai? Read answer
    • Qashqai 2006-2014 - Where is the Nissan Qashqai indicator relay located? Read answer
    • Qashqai 2014-2022 - How do you disable Start and Stop in a Nissan Qashqai? Read answer
    • Qashqai 2006-2014 - Why are the Nissan Qashqai steering wheel buttons not working? Read answer

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos