|
Do it yourself
| |||
| ||||
How to Replace the Oil Filter and Engine Oil on the Nissan Qashqai 1.6 DCi
Model: Nissan Qashqai
J11
- Years:
2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Video tutorial
This short video tutorial will explain how to replace the oil filter and engine oil on the Nissan Qashqai 1.6 DCi. It is very important to use oil recommended by the manufacturer when replacing the oil to avoid damaging some components; for the Nissan Qashqai, you should use Bardhal Plus. Now, as shown in the video, lift the car using a jack and unscrew the plastic pins that secure the oil sump, then remove it to allow the old oil to drain. Once the oil has stopped draining, you can refit the oil sump and remove the jack. Now, remove the oil filter located in the engine bay; it is important to also unscrew the filter housing because before inserting the new one, you must not only change the seal but also clean it with specific additives. After this operation, replace the filter and reassemble everything on the car. As the final step, add the new oil to the reservoir.
Updated on 19 July 2026 by ScegliAuto
Related tutorials
Nissan Qashqai
(2014-2022 /
J11)
Today, follow these instructions to help you replace the engine oil and oil filter while performing the routine maintenance service on the Nissan Qas…
Nissan Qashqai
(2014-2022 /
J11)
These short and simple steps will show us how to disassemble and replace the fuel filter of the Nissan Qashqai 1.6 dCi. To begin, we open the hood of…
Nissan Qashqai
(2006-2014 /
J10)
Follow this guide to remove and replace the diesel filter on the Nissan Qashqai 2.0 dCi in simple and quick steps. First, open the bonnet of your car…
Other guides you may be interested in
|
How to Remove the Rear Seat of a Hyundai Tucson?
To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.053
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |