|
Do it yourself
| |||
| ||||
How to Change the Engine Oil and Filter on the Nissan Qashqai
Model: Nissan Qashqai
J10
- Years:
2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Video tutorial
On the Nissan Qashqai, start by preparing the materials: new oil and an oil filter cartridge with its seal. Then, open the bonnet and locate the oil filler point, leaving it ready for later refilling. The "dirty" work is done from underneath: lift the Nissan Qashqai and secure it, then access the drain plug of the sump. The video shows the oil draining into a container, with the plug being unscrewed and then replaced once all the oil has drained. Always ensure the engine is not hot, hold the container in position, and be cautious of the flow when the plug is released. After draining, move on to the oil filter. On the Nissan Qashqai, unscrew the plastic cover of the filter housing, remove the old cartridge, and work on the seal: the video clearly shows the O-ring being removed from its housing and replaced with a new one before inserting the new cartridge into the filter housing. At this point, reassemble the unit and refit it. After securing the underside, return to the top for refilling: use a funnel to pour new oil into the filler cap. Finally, check the level with the dipstick to ensure it is correct before closing everything up.
Posted on 14 August 2026 by ScegliAuto
Related tutorials
Nissan Qashqai
(2006-2014 /
J10)
The first step when changing the engine oil in a car is to unscrew the filler cap so that the used oil drains out more easily. After doing this, lift…
Nissan Qashqai
(2006-2014 /
J10)
To change the engine oil on a Nissan Qashqai, lift the car with a jack or ramp to access the screws securing the undertray at the bottom of the vehic…
Nissan Qashqai
(2014-2022 /
J11)
To replace the engine oil and filter in a Nissan Qashqai, you need to bring the engine to operating temperature, then turn it off and safely lift the…
Other guides you may be interested in
|
Frequently Asked QuestionsHow to reset the tyre pressure warning light on the Kia Niro EV?
To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.063
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |