Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the engine oil in a Nissan Qashqai 1?

Model: Nissan Qashqai J10 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Engine oil

See other generations:
Video tutorial

The first step when changing the engine oil in a car is to unscrew the filler cap so that the used oil drains out more easily. After doing this, lift the Nissan Qashqai on axle stands and drain the used oil from the vehicle.

While it drains into a collection tray through the open oil sump, remove the filter and replace both the cartridge and the O-ring. Once finished and the oil sump is refitted, lower the car back to the ground and refill the oil reservoir.


Posted on 13 June 2026 by ScegliAuto


Related tutorials

How to Change the Engine Oil on a Nissan Qashqai
How to Change the Engine Oil on a Nissan Qashqai
Nissan Qashqai (2006-2014 / J10) To change the engine oil on a Nissan Qashqai, lift the car with a jack or ramp to access the screws securing the undertray at the bottom of the vehic…
How to change the engine oil on the Nissan Qashqai
How to change the engine oil on the Nissan Qashqai
Nissan Qashqai (2021-2026 / J12) To change the engine oil on a Nissan Qashqai, it is preferable to lift the car on a workshop ramp as it can be quite awkward to work in a tight space…
How to Change Engine Oil and Filter in a Nissan Qashqai
How to Change Engine Oil and Filter in a Nissan Qashqai
Nissan Qashqai (2014-2022 / J11) To change the engine oil and filter in a Nissan Qashqai, warm up the engine for a few minutes, then turn it off and lift the vehicle. Place a contain…

    Frequently Asked Questions

    • Qashqai 2006-2014 - What is the right amount of engine oil for the Nissan Qashqai 1.6 dci? Read answer
    • Qashqai 2014-2022 - Where is the oil dipstick of the Nissan Qashqai located? Read answer
    • Qashqai 2014-2022 - Where is the Nissan Qashqai 1.5 dCi engine oil dipstick located? Read answer

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos